스쿠버 다이빙 장비와 부품에 사용되는 O-링입니다.
품 번 | 사 용 |
---|---|
003 | Submersible pressure gauge/consoles: internal swivel seal |
004 | Older internal swivel seal models; AT-PAC BC’s Power inflator control Sherwood 6121-122, Apeks id: AP6403 |
005 | Seal used in older depth and tank “stem” gauges |
006 | Common seal in regulator balance chambers; Power inflator stems; CO2 detonators; SAS gland seal .Sherwood 5121-101,6500-118, scubpro1.050.117,mares 46110101,Apeks ID:AP1299 |
007 | Regulator piston ring; small HP seal ,Sherwood G007A |
008 | Sonic regulators; Regulator piston ring; small HP sea, Sherwood 6110-129, Scubapro 1,050,126 |
009 | Seal in open-tube depth gauges, Sherwood 6121-135,6400-113 |
010 | Regulator hose: swivel end; Piston barrel HP seal; 2nd stage orifIce seal; Valve stem seals; Early calupso Regulators; Power inflators stems;Sherwood 5121-104,6110-119,6161-101,6121-137,Scubapro1,050,351,Mares 46110107, APEKS ID:AP1154 |
011 | Regulator hose: male end; Regulator port plugs LP; Hose adapters; J-regulators; Early replacement HP seats; Captured HP outlets; Piston HP barrel BC hose coupler, Scubapro 1,050,351,Mares 46110107, Sherwood 5121-103,APEKS:AP1409 |
012 | Console/gauge hoses: male end; Underneath filter; Hose adapters; HP seat seal; LP swivel cap; HP port plugs, Scubapro 1,050,145, Mares 46110108, 46110110,APEKS :AP1445 |
013 | Piston seat seal; Survivair manifolds; Power inflator seals; Common in aluminium cylinder valve to yoke regulator seals Sherwood 6400-115, Scubapro 1,050,147, Mares 46110215,APEKS :AP1410 |
014 | + 2nd stage inlet fittings; J-regulators; Common in aluminium cylinder valve to yoke regulator,Sherwood 5121-105, scubapro 1,050,347, Mares 46110211,APEKS :AP1159 |
015 | 1st stage inlet fittings; HP seal retainer seal; J valve module; Valve HP plugs; 2nd stage barrel and housing plug seals,Shewood 5121-106, Scubapro1,050,158,APEKS :AP1267 |
016 | Old 1/2″ NPS valves; 2nd stage inlet fittings; SAS LP seats; J-regulators; HP module seal; Valve HP plugs; 2nd stage barrel and housing plug seals; Paintball Guns; M18X1,5 Valves,Sherwood 6400-125,6500-129,scubapro 1,050,160 |
017 | Regulator piston ring and cap; Dacor HP module,Scubapro 1,050,160, 1,050,162, Mares 46110225 |
018 | Regulator piston ring (1970’s); 2nd stage inlet seal; Body plug seal |
019 | Healthway / USD / Sherwood industrial piston regulator,APEKS :AP1438 |
020 | Regulator piston ring (USD & SAS) Sherwood 6400-102 |
021 | Regulator piston ring |
022 | Common regulator piston ring; Body plug seals; Paintball guns, Sherwood 5110-107, Scubapro 1,050,177 |
023 | Regulator LP swivel seal; Body plug seals Sherwood 6110-131,6400-107 |
024 | Piston cap seals (USD); SAS 1st stage Sherwood 6110-125,APEKS :AP1420 |
025 | Gauge lenses, Sherwood5110-109 |
026 | For Suunto C3,Cobra,EON, VIPER,FAVOUR,AIR LUX Computers |
027 | Scubapro part no 1,050,164 |
106 | Sherwood part no 5121-102 |
107 | Sherwood part no 6121-129 |
109 | Scubapro part no 1,050,385 |
110 | Old double manifolds; Spearguns |
111 | Australian/ Nemrod valves; BC inflators; DIN regulator seals Sherwood 6400-138, Scubapro 1,050,193;1,050,428, Mares 46110247, APEKS :AP1166 |
112 | Steel tank valve; Basal DIN seal ,Scubapro 11,361,115 |
113 | Aquarius piston ring / cap seal; Healthway regulators |
114 | Early piston models; Paintball Guns |
115 | AMF HP module; BC fittings |
116 | Genesis tank valve; BCD Inflator Mechanisms; Paintball Guns |
211 | Early BC fittings |
213 | Early BC fittings |
214 | Cylinder to 3/4 valve seal; Cylinder to M25X2 valve Seals |
215 | Cylinder to M25X2 valve Seals |
610 | BCD internal hose o-ring clip end |
2.4 x 1.9 RO | Scubapro part no 1,050,317 |
24 X 2 | For Suunto C6,Zander |
36 X1.5 | For Suunto C9 and D9 |
39 X 1 | For SUUNTO C1, Stinger, Spider computers |
39 X 1.50 | For Suunto C8 and D4 |
15 X 4.00 | Mares part no 46200559 |
902 | Scubapro part no 1,050,293 |
903 | Sherwood part no 6121-141 |
905 | Sherwood part no 6400-135 |
906 | Sherwood part no 6110-115 & 6121-104 |
119 | Mares Spear Gun |
123 | |
27 x 1.3 | For Aeris F10 diving watch |
1.7 x 1.0 | For APEKS regulators |
1.95 X 1.0 | Sherwood part no 6500-112 |
2.20 X 1.0 | Scubapro part no 1,050,363 |
2.5 x 1.0 | For APEKS regulators |
▲ 출처 : https://scubagaskets.com/application-guide/
품번 | 외경(인치) | 사 용 |
214 | 1-1/4 | Cylinder with Large Neck/Valve (3/4 NPS – All Aluminum, most Steel cylinders) |
112 | 11/16 | Standard DIN Regulator/Valve (Nearly all DIN regulators) |
111 | 5/8 | Small DIN Regulator/Valve (You know if you need this one) |
015 | 11/16 | Cylinder Valve Bonnet Nut |
014 | 5/8 | Standard Yoke Regulator/K-valve |
013 | 9/16 | Large Low-Pressure Port/Hose (1/2 UNF) |
012 | 1/2 | High-Pressure Port/Hose (7/16 UNF) Manifold and Manifold Port Plugs |
011 | 7/16 | Standard Low-Pressure Port/Hose (3/8 UNF) |
010 | 3/8 | Low-Pressure Hose/2nd Stage Regulator Cylinder Valve Stem |
003 | 3/16 | High-Pressure Hose/SPG Swivel |
▲ 출처 : https://www.divegearexpress.com/viton-master-o-ring-kit-50-pieces
품 명 | O-링 번호 |
BC 파워 인플레이터 | 006 2개, 011 1개, 012 1개, 112 1개 |
게이지 오링 | 003 2개 |
탱크 밸브 | 3/4 NPS, M25X2 목 214 1개 요크 타입 014 1개, 딘 타입 112 1개 |
표준 저압 호스 | 1단계쪽 011 1개 |
고압 호스 | 1단계쪽 012 1개 |
※ 위 내용은 다이빙 장비에 사용되는 O-링을 설명하기 위한 것입니다. 혹시라도 위 내용을 참고해서 본인의 장비에 O-링을 교체하여 발생하는 문제에 대해서는 이 글의 작성자와 이 블로그의 운영자는 민,형사상 책임이 없음을 알려드립니다. 교체한 본인의 책임입니다. 다이빙 장비에 대한 유지보수 자격이 없는 경우 다이빙 장비에 대한 유지보수 자격이 없는 경우, 반드시 전문가에게 수리를 맡겨 수리와 점검을 받으시길 바랍니다.